Dell Inspiron 16 5620, Руководство по обслуживанию

Страница: 42 / 69

3. Adhere the tapes that secure the speaker cable to the palm-rest and keyboard assembly.
4. Connect the touchpad cable and close the latch of the touchpad connector on the system board.
5. Connect the keyboard cable and close the latch of the keyboard connector on the system board.
6. Connect the keyboard backlit cable and close the latch of the keyboard backlit connector on the system board.
Next steps
1. Install the base cover .
2. Follow the procedure in After working inside your computer .
System board
Removing the system board
Prerequisites
1. Follow the procedure in Before working inside your computer .
NOTE: Ensure that your computer is in Service Mode. For more information see, step 6 in Before working inside your
computer .
2. Remove the base cover .
3. Remove the memory module .
4. Remove the M.2 2230 solid-state drive or M.2 2280 solid-state drive , whichever is applicable.
5. Remove the wireless card .
6. Remove the heatsink .
About this task
The following image(s) indicate the location of the system board and provides a visual representation of the removal procedure.
1. Display-cable connector
2. Power-cable connector
42 Removing and installing components