Dell Inspiron 16 5620 Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 69

background image

3. Peel the clear adhesive tape and lift the latch of the I/O-board cable.
4. Disconnect the I/O board cable from the I/O board.
5. Disconnect the coin-cell battery cable from the I/O board.
6. Lift the fingerprint-reader cable connector latch and disconnect the optional fingerprint-reader cable from the I/O board.
7. Remove the screw (M2x3) that secures the I/O board to the palm-rest and keyboard assembly.
8. Lift the I/O board off the palm-rest and keyboard assembly.

Installing the I/O board

Prerequisites

If you are replacing a component, remove the existing component before performing the installation process.

About this task

The following image(s) indicate the location of the I/O board and provides a visual representation of the installation procedure.

Steps

1. Align the screw holes on the I/O board with the screw holes on the system board and palm-rest and keyboard assembly.
2. Align the ports on the I/O board to the slots on the palm-rest and keyboard assembly.
3. Place the I/O board on the palm-rest and keyboard assembly.
4. Replace the two screws (M2x3) that secure the I/O board to the palm-rest and keyboard assembly.
5. Connect the I/O board cable to the I/O board.
6. Close the latch and replace the clear adhesive tape.
7. Connect the coin-cell battery cable to the I/O board.
8. Connect the optional fingerprint-reader cable to the I/O board and close the latch to secure the cable.
9. Close the right-display hinge.
10. Replace the two screws (M2.5x5) that secure the right-display hinge of the display assembly to the system board.

Removing and installing components

37

«
...
35
36
37
38
39
...
»

Содержание Inspiron 16 5620






































































Отзывы:

Нет отзывов

Похожие инструкции для Inspiron 16 5620

Бренд: MSI Страницы: 102

Бренд: Clevo Страницы: 99

Бренд: Acer Страницы: 79

Бренд: Acer Страницы: 83

Бренд: Acer Страницы: 72

Бренд: Acer Страницы: 83

Бренд: Acer Страницы: 78

eMachines eM250

Бренд: Acer Страницы: 194

eMachines E630 Series

Бренд: Acer Страницы: 198

ENDURO Urban N3 Lite

Бренд: Acer Страницы: 80

ESPRIMO Mobile U9210

Бренд: Fujitsu Страницы: 6

ESPRIMO Mobile V5505

Бренд: Fujitsu Страницы: 27

Бренд: Fujitsu Страницы: 92

Бренд: Fujitsu Страницы: 2

ESPRIMO Mobile V6555

Бренд: Fujitsu Страницы: 34

ESPRIMO Mobile V6535

Бренд: Fujitsu Страницы: 5

E8110 - LifeBook - Core 2 Duo 1.66 GHz

Бренд: Fujitsu Страницы: 128

Бренд: Fujitsu Страницы: 52

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды