Dell Inspiron 15-7558, Руководство по обслуживанию

Страница: 67 / 85

Replacing the display assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before
working inside your computer . After working inside your computer, follow
the instructions in After working inside your computer . For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance .
Procedure
CAUTION: Place the computer on a soft and clean surface to avoid
scratching the display.
1 With the display screen facing down, align the screw holes on the display hinges
with the screw holes on the computer base.
2 Replace the screws that secure the display assembly to the computer base.
3 Turn the computer over and close the display.
4 Turn the computer over.
5 Slide the Windows button-board cable into the system-board connector and
press down on the latch to secure the cable.
6 Adhere the tape to the Windows button-board connector.
7 Connect the display cable to the system board.
8 Align the screw holes on the display-cable bracket with the screw holes on the
system board.
9 Replace the screws that secure the display-cable bracket to the system board.
10 Adhere the tape that secures the display cable to the display hinge.
11 Route the antenna cables through the routing guides on the computer base and
adhere the tape that secures the antenna cables to the display hinge.
12 Connect the antenna cables to the wireless card. See “ Replacing the wireless
card ”.
Post-requisites
1 Replace the battery .
67