Dell Inspiron 15-5568, Руководство по обслуживанию

Страница: 51 / 87

Removing the system board
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer . After working inside your computer, follow the instructions in After
working inside your computer . For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance .
NOTE: Your computer’s Service Tag is stored in the system board. You must enter the Service Tag in the BIOS setup
program after you replace the system board.
NOTE: Replacing the system board removes any changes you have made to the BIOS using the BIOS setup program. You
must make the appropriate changes again after you replace the system board.
NOTE: Before disconnecting the cables from the system board, note the location of the connectors so that you can
reconnect the cables correctly after you replace the system board.
Prerequisites
1. Remove the base cover .
2. Remove the battery .
3. Remove the memory modules .
4. Remove the heat sink .
Procedure
1. Disconnect the fan cable and the power-adapter port cable from the system board.
2. Peel off the pieces of tape that secure the display cable and touch-screen board cable from their respective connectors.
3. Open the latches and disconnect the display cable and the touch-screen board cable from the system board.
33
Removing the system board 51