Installing the 4-cell battery
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following image indicates the location of the 4-cell battery and provides a visual representation of the installation procedure.
Steps
1. Place the battery on the palm-rest and keyboard assembly.
2. Align the screw holes on the battery to the screw holes on the palm-rest and keyboard assembly.
3. Replace the four (M2x3) screws that secure the battery to the palm-rest and keyboard assembly.
4. Connect the battery cable to the connector on the system board.
NOTE:
When replacing the 4-cell battery, use a scribe push upward through the bottom-left screw hole to remove the
battery rubber stopper and transfer it to the new replacement 4-cell battery.
Next steps
1. Install the
.
2. Install the
.
After working inside your computer
.
Disconnecting the battery cable
Prerequisites
Before working inside your computer
.
2. Remove the
.
3. Remove the
.
About this task
The following images indicate the location of the battery cable and provide a visual representation of the removal procedure.
22
Removing and installing components
Содержание Inspiron 15 3525
Страница 15: ...Removing and installing components 15 ...
