Dell Inspiron 14 5402, Руководство по обслуживанию

Страница: 42 / 89

Steps
1. Place the power-adapter port into the slot on the palm rest and keyboard assembly.
2. Replace the screw (M2x3) that secures the power-adapter port on the palm-rest and keyboard assembly.
3. Route the power-adapter port cable through the routing guides on the palm-rest and keyboard assembly.
4. Connect the power-adapter port cable to the system board.
5. Press down the right display-hinge and align the screw holes on the display hinges with the screw holes on the system
board.
6. Replace the two screws (M2.5x5) that secure the right display-hinge to the system board.
Next steps
1. Install the base cover .
2. Follow the procedure in After working inside your computer .
Display assembly
Removing the display assembly
Prerequisites
1. Follow the procedure in Before working inside your computer .
2. Remove the base cover .
About this task
The following images indicate the location of the display assembly and provide a visual representation of the removal procedure.
42 Removing and installing components