manualshive.com logo in svg

Dell Inspiron 13 5000, Руководство по обслуживанию

Поделиться
Скачать
Dell Inspiron 13 5000 Скачать руководство пользователя страница 102

3 

Expand 

Sound, video and game controllers

 to view the audio controller.

Before installation

After installation

Changing the audio settings

1 

On the taskbar, click or tap the search box, and then type 

Dell Audio

.

2 

Click or tap 

Dell Audio

 and change the audio settings as required.

Camera

The Inspiron 13-5378 is shipped with an integrated 0.92 megapixel high-
speed camera with a maximum of 1280 X 720 HD resolution at 30 FPS. The 
camera has built-in digital-array microphones.

NOTE: You must replace the camera module if you encounter any 

issues with the built-in microphones.

Infrared camera – optional 

- Allows you to video chat, capture photos, and 

record videos. Depth-sensing feature of the camera enhances security when 
paired with Windows Hello.

Identifying the webcam in device manager

1 

On the taskbar, click or tap the search box, and then type 

Device 

Manager

.

2 

Click or tap 

Device Manager

.

The 

Device Manager

 window is displayed.

3 

Expand 

Imaging Devices

.

Starting the camera application

1 

On the taskbar, click or tap the search box, and then type 

Camera

.

102

Содержание Inspiron 13 5000








































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды