Replacing the power-adapter
port
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer
computer, follow the instructions in
. For more safety best practices, see the Regulatory
Compliance home page at
www.dell.com/regulatory_compliance
.
Procedure
1
Place the power-adapter port into the slot on the palm rest and keyboard
assembly.
2
Align the screw hole on the power-adapter port with the screw hole on
the palm rest and keyboard assembly.
3
Replace the screw that secures the power-adapter port to the palm rest
and keyboard assembly.
4
Connect the power-adapter port cable to the system board.
Post-requisites
1
.
2
.
65
Содержание Inspiron 13 5000 Series 2-in-1
