Dell Inspiron 13 5000 Series 2-in-1, Руководство по обслуживанию

Страница: 46 / 139

Replacing the status-light
board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer . After working inside your
computer, follow the instructions in After working inside your
computer . For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance .
Procedure
1 Place the status-light board into the slot on the palm rest and keyboard
assembly.
2 Slide the status-light board cable into the connector on the keyboard
daughter-board and close the latch to secure the cable.
3 Adhere the foam that secures the status-light board to the palm rest and
keyboard assembly.
4 Adhere the status-light board cable to the palm rest and keyboard
assembly.
5 Route the speaker cable through the routing guides on the palm rest and
keyboard assembly and adhere the tape that secures the speaker cable to
the palm rest and keyboard assembly.
Post-requisites
1 Replace the battery .
2 Replace the base cover .
46