manualshive.com logo in svg

Dell Inspiron 1150, Руководство по обслуживанию, Страница: 16 / 62

Поделиться
Скачать
Dell Inspiron 1150 Скачать руководство пользователя страница 16

Memory, CD or DVD Drive, Modem, and Mini PCI Card: Dell Inspiron 1150 Service Manual

CD or DVD Drive

Removing the CD or DVD Drive 

 

CAUTION: 

Before working inside your Dell™ computer, read the safety instructions in 

your 

Owner's Manual

. 

 

CAUTION: 

To prevent static damage to components inside your computer, discharge 

static electricity from your body before you touch any of your computer's electronic 

components. You can do so by touching an unpainted metal surface.

1.  Follow the instructions in "

Before Working Inside Your Computer

." 

2.  Turn the computer over, and remove the M2.5 x 8-mm screw (labeled "O") next to the memory 

module cover. 

3.  Loosen the captive screw (labeled "M") in the memory module cover, and lift the cover away 

from the computer. 

 

1

captive screw

2

memory module cover

4.  Press the lever next to the memory module connectors in the direction of the arrow on the lever 

(towards the drive) to release the drive. 

file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...cked%20ok/Inspiron/1150/1150%20SM/upgrades.htm (4 of 10)6/21/2004 12:41:02 AM

Содержание Inspiron 1150































































Отзывы:

Нет отзывов