Replacing the touch pad
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer
computer, follow the instructions in
. For more safety best practices, see the Regulatory
Compliance home page at
www.dell.com/regulatory_compliance
.
Procedure
1
Slide the tabs on the touch pad into the slots on the palmrest and
keyboard assembly.
2
Align the screw holes on the touch pad with the screw holes on the
palmrest and keyboard assembly.
3
Replace the screws that secure the touch pad to the palmrest and
keyboard assembly.
4
Place the keyboard cable over the touch pad.
5
Adhere the tapes over the touch pad.
6
Slide the touch-pad cable into its slot on the touch pad and press down
the latch to secure the cable.
Post-requisites
1
.
2
.
55
Содержание Inspiron 11 3168
