Dell Inspiron 11 3000 Series, Руководство по обслуживанию

Страница: 63 / 110

Replacing the display assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before
working inside your computer . After working inside your computer, follow
the instructions in After working inside your computer . For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance .
Procedure
CAUTION: Place the computer on a soft and clean surface to avoid
scratching the display back-cover and antenna assembly.
1 Place the display assembly on a flat and clean surface.
2 Align the screw holes on the display hinges with the screw holes on the palm-
rest and keyboard assembly.
3 Replace the two screws (M2.5x6) that secure the display assembly to the palm-
rest and keyboard assembly.
4 Slide the display cable into the connector on the system board and close the
latch to secure the cable.
5 Slide the display-cable bracket into the slot on the palm-rest and keyboard
assembly.
6 Align the screw hole on the display-cable bracket with the screw hole on the
system board.
7 Replace the screw (M2x3) that secures the display-cable bracket to the system
board.
Post-requisites
1 Replace the wireless card .
2 Follow the step 4 procedure in “ Replacing the I/O board ”.
3 Replace the battery .
4 Follow the procedure from step 2 to step 5 in “ Replacing the base cover ”.
63