Dell iDRAC7, Руководство пользователя

Страница: 45 / 252

#default gateway
option routers 192.168.0.1;
option subnet-mask 255.255.255.0;
option nis-domain "domain.org";
option domain-name "domain.org";
option domain-name-servers 192.168.1.1;
option time-offset -18000; # Eastern Standard Time
# option ntp-servers 192.168.1.1;
# option netbios-name-servers 192.168.1.1;
# --- Selects point-to-point node (default is hybrid). Don't change this unless
# -- you understand Netbios very well
# option netbios-node-type 2;
option vendor-class-identifier "iDRAC";
set vendor-string = option vendor-class-identifier;
option myname "2001::9174:9611:5c8d:e85//xmlfiles/dhcpProv.xml -u root -p
calvin";
range dynamic-bootp 192.168.0.128 192.168.0.254;
default-lease-time 21600;
max-lease-time 43200;
# we want the nameserver to appear at a fixed address
host ns {
next-server marvin.redhat.com;
hardware ethernet 12:34:56:78:AB:CD;
fixed-address 207.175.42.254;
}
}
Enabling Auto Config Using iDRAC Web Interface
Make sure that DHCPv4 and the Enable IPv4 options are enabled and Auto-discovery is disabled.
To enable Auto Config:
1. In the iDRAC7 Web interface, go to Overview
→
iDRAC Settings
→
Network.
The Network page is displayed.
2. In the Auto Config section, select one of the following options to enable Auto Config:
– Enable Once — Configures the component only once using the XML file referenced by the DHCP server. After
this, Auto Config is disabled.
– Enable Once After Reset — After the iDRAC7 is reset, configures the components only once using the XML file
referenced by the DHCP server. After this, Auto Config is disabled.
– Enable Always — Configures the components (using the XML file) each time the iDRAC7 receives an IP address
from DHCP server.
To disable the Auto Config feature, select Disable.
3. Click Apply to apply the setting.
Enabling Auto Config Using RACADM
To enable Auto Config feature using RACADM, use the
iDRAC.NIC.AutoConfig
object. For more information, see
the RACADM Command Line Reference Guide for iDRAC7 and CMC .
Setting Up Management Station
A management station is a computer used for accessing iDRAC7 interfaces to remotely monitor and manage the
PowerEdge server(s).
45