Dell iDRAC7, Руководство пользователя

Страница: 238 / 252

The Active Directory is configured for a domain present in Windows Server 2008 Active Directory. A child or sub domain
is present for the domain, the user and group is present in the same child domain, and the user is a member of that
group. When trying to log in to iDRAC7 using the user present in the child domain, Active Directory Single Sign-On login
fails.
This may be because of the an incorrect group type. There are two kinds of Group types in the Active Directory server:
• Security — Security groups allow you to manage user and computer access to shared resources and to filter group
policy settings.
• Distribution — Distribution groups are intended to be used only as email distribution lists.
Always make sure that the group type is Security. You cannot use distribution groups to assign permission on any
object, however use them to filter group policy settings.
Single Sign-On
SSO login fails on Windows Server 2008 R2 x64. What are the settings required to resolve this?
1. Run the technet.microsoft.com/en-us/library/dd560670(WS.10).aspx for the domain controller and domain policy.
2. Configure the computers to use the DES-CBC-MD5 cipher suite.
These settings may affect compatibility with client computers or services and applications in your environment.
The Configure encryption types allowed for Kerberos policy setting is located at Computer Configuration
→
Security Settings
→
Local Policies
→
Security Options.
3. Make sure that the domain clients have the updated GPO.
4. At the command line, type
gpupdate /force
and delete the old key tab with
klist purge
command.
5. After the GPO is updated, create the new keytab.
6. Upload the keytab to iDRAC7.
You can now log in to iDRAC7 using SSO.
Why does SSO login fail with Active Directory users on Windows 7 and Windows Server 2008 R2?
You must enable the encryption types for Windows 7 and Windows Server 2008 R2. To enable the encryption types:
1. Log in as administrator or as a user with administrative privilege.
2. Go to Start and run gpedit.msc. The Local Group Policy Editor window is displayed.
3. Go to Local Computer Settings
→
Windows Settings
→
Security Settings
→
Local Policies
→
Security Options. .
4. Right-click Network Security: Configure encryption types allowed for kerberos and select Properties.
5. Enable all the options.
6. Click OK. You can now log in to iDRAC7 using SSO.
Perform the following additional settings for Extended Schema:
1. In the Local Group Policy Editor window, navigate to Local Computer Settings
→
Windows Settings
→
Security
Settings
→
Local Policies
→
Security Options .
2. Right-click Network Security: Restrict NTLM: Outgoing NTLM traffic to remote server and select Properties.
3. Select Allow all, click OK, and close the Local Group Policy Editor window.
4. Go to Start and run cmd. The command prompt window is displayed.
5. Run the command
gpupdate /force
. The group policies are updated. Close the command prompt window.
6. Go to Start and run regedit. The Registry Editor window is displayed.
7. Navigate to HKEY_LOCAL_MACHINE
→
System
→
CurrentControlSet
→
Control
→
LSA .
8. In the right-pane, right-click and select New
→
DWORD (32-bit) Value .
238