Dell iDRAC7, Руководство пользователя

Страница: 154 / 252

Setting Alert Recurrence Event
You can configure iDRAC to generate additional events at specific intervals if the system continues to operate at a
temperature which is greater than the inlet temperature threshold limit. The default interval is 30 days. The valid range is
0 to 365 days. A value of ‘0’ indicates that the event recurrence is disabled.
NOTE: You must have Configure iDRAC privilege to set the alert recurrence value.
Setting Alert Recurrence Events Using iDRAC7 Web Interface
To set the alert recurrence value:
1. In the iDRAC7 Web interface, go to Overview
→
Server
→
Alerts
→
Alert Recurrence.
The Alert Recurrence page is displayed.
2. In the Recurrence column, enter the alert frequency value for the required category, alert, and severity type(s).
For more information, see the
iDRAC7 Online help
.
3. Click Apply.
The alert recurrence settings are saved.
Setting Alert Recurrence Events Using RACADM
To set the alert recurrence event using RACADM, use the eventfilters subcommand. For more information, see the
RACADM Command Line Reference Guide for iDRAC7 and CMC
.
Setting Event Actions
You can set event actions such as perform a reboot, power cycle, power off, or perform no action on the system.
Related Links
Filtering Alerts
Enabling or Disabling Alerts
Setting Event Actions Using Web Interface
To set an event action:
1. In iDRAC7 Web interface, go to Overview
→
Server
→
Alerts . The Alerts page is displayed.
2. Under Alerts Results, from the Actions drop-down menu, for each event select an action:
– Reboot
– Power Cycle
– Power Off
– No Action
3. Click Apply.
The setting is saved.
Setting Event Actions Using RACADM
To configure an event action, use one of the following:
154