background image

Configuring iDRAC6 Enterprise

53

 

NOTE: 

The severity levels defined by the Remote Syslog protocol differ from the 

standard IPMI System Event Log (SEL) severity levels. Hence all iDRAC6 Remote 
Syslog entries are reported in the syslog server with severity level as 

Notice

.

The following example shows the configuration objects and the RACADM 
command usage to change remote syslog settings:

racadm config –g cfgRemoteHosts –o 

cfgRhostsSyslogEnable [1/0] ; default is 0

racadm config –g cfgRemoteHosts –o 

cfgRhostsSyslogServer1 <

servername1

> ; default is 

blank

racadm config –g cfgRemoteHosts –o 

cfgRhostsSyslogServer2 <

servername2

>; default is 

blank

racadm config –g cfgRemoteHosts –o 

cfgRhostsSyslogServer3 <

servername3

>; default is 

blank

racadm config –g cfgRemoteHosts –o 

cfgRhostsSyslogPort <

portnumber

>; default is 514

Remote File Share

The remote file share feature through iDRAC6 allows you to specify a 
CD/DVD ISO image file located on a network share and make it available to 
the server’s operating system as a virtual drive by mounting it as a CD or 
DVD using NFS or CIFS. 

 

NOTE: 

This feature works only with IPv4 addresses. IPv6 addresses are currently 

not supported.

CIFS shared image path should be in the format:

//<ipaddress or domain 

name>/<share_name>/<pathtoimage>

The NFS shared image path should be in the format:

<ipadddress>:/<pathtoimage>

Содержание IDRAC6

























































































































































































































































































































































































































































































Отзывы: