manualshive.com logo in svg

Dell IDRAC6, Руководство пользователя, Страница: 392 / 472

Поделиться
Скачать
Dell IDRAC6 Скачать руководство пользователя страница 392

392

iDRAC6 Enterprise Property Database Group and Object Definitions

Default

192.168.0.1

Description

The gateway IP address used for static assignment of the RAC IP address. 
This property is only valid if 

cfgNicUseDhcp

 is set to 

0

 (FALSE).

cfgNicUseDhcp (Read/Write)

Legal Values

1 (TRUE)

0 (FALSE)

Default

0

Description

Specifies whether DHCP is used to assign iDRAC6 IP address. If this property 
is set to 1 (TRUE), then iDRAC6 IP address, subnet mask, and gateway are 
assigned from the DHCP server on the network. If this property is set to 

0

 

(FALSE), the static IP address, subnet mask, and gateway is assigned from 
the 

cfgNicIpAddress

, 

cfgNicNetmask

, and 

cfgNicGateway

 properties.

cfgNicMacAddress (Read Only)

Legal Values

A string representing the RAC NIC MAC address.

Default

The current MAC address of iDRAC6 NIC. For example, 00:12:67:52:51:A3.

Description

iDRAC6 NIC MAC address.

Содержание IDRAC6

























































































































































































































































































































































































































































































Отзывы:

Нет отзывов