Dell IDRAC6, Руководство пользователя

Страница: 306 / 472

306
Using iDRAC6 Configuration Utility
Reset to Default
Use the Reset to Default menu item to reset all of iDRAC6 configuration
items to the factory defaults. This may be required, for example, if you have
forgotten the administrative user password or if you want to reconfigure
iDRAC6 from the default settings.
NOTE:
In the default configuration, iDRAC6 networking is disabled. You cannot
reconfigure iDRAC6 over the network until you have enabled iDRAC6 network in
iDRAC6 Configuration Utility.
Auto–Discovery
(continued...)
Before adding your Dell system to the network and using the
auto–discovery feature, ensure that:
• Dynamic Host Configuration Protocol (DHCP)
server/Domain Name System (DNS) are configured.
• Provisioning Web services is installed, configured, and
registered.
Account Access Select Enabled to enable the administrator account.
Select Disabled to disable the administrator account.
IPMI LAN Privilege Select between Admin , User , Operator , and No Access .
Account User Name Press <Enter> to edit the user name and press <Esc> when
you have finished. The default user name is
root .
Enter Password Enter the new password for the administrator account.
The characters are not echoed on the display as you enter them.
Confirm Password Re-enter the new password for the administrator account.
If the characters you enter do not match the characters you
entered in the
Enter Password field, a message displays and
you must re-enter the password.
Table 19-2. Lan User Configuration Screen (continued)
Item Description