manualshive.com logo in svg

Dell IDRAC6, Руководство пользователя, Страница: 223 / 472

Поделиться
Скачать
Dell IDRAC6 Скачать руководство пользователя страница 223

Configuring the vFlash Media Card for Use With iDRAC6

223

Configuring the vFlash Media Card 
for Use With iDRAC6

The vFlash media card is a Secure Digital (SD) card that plugs into the 
optional iDRAC6 Enterprise card slot at the back corner of the system. 
It provides storage space that behaves like a common USB Flash Key device.

Installing a vFlash Media Card

 

NOTE: 

Dell-branded vFlash media is required for the vFlash partition.

1

Remove the blade from the chassis.

2

Locate the vFlash media slot at the back corner of the system.

 

NOTE: 

You do not need to remove the blade cover to install or remove 

the card.

Содержание IDRAC6

























































































































































































































































































































































































































































































Отзывы:

Нет отзывов