manualshive.com logo in svg

Dell IDRAC6, Руководство пользователя, Страница: 219 / 472

Поделиться
Скачать
Dell IDRAC6 Скачать руководство пользователя страница 219

Using GUI Console Redirection

219

Does switching off the 
local video also switch 
off the local keyboard 
and mouse?

Yes. 

Does turning off the 
local console turn off 
the video on the 
remote console 
session?

No, turning the local video on or off is independent of the 
remote console session.

What privileges are 
needed for an iDRAC6 
user to turn on or off 
the local server video?

Any user with iDRAC6 configuration privileges can turn the 
local console on or off.

How can I get the 
current status of the 
local server video?

The status is displayed on the 

Console Redirection and 

Virtual Media

 screen of iDRAC6 Web interface. 

The RACADM CLI command 

racadm getconfig 

–g cfgRacTuning

 displays the status in the object 

cfgRacTuneLocalServerVideo

. This racadm command can 

be executed from Telnet/SSH or a remote session to the 
iDRAC6. 

The remote RACADM command is:

racadm -r <idracip> -u <user> -p 

<password> getconfig -g cfgRacTuning

The status is also seen on the iKVM OSCAR display. When 
the local console is enabled, a green status appears next to 
the server name. When disabled, a yellow dot indicates that 
the local console is locked by iDRAC6. 

I cannot see the 
bottom of the system 
screen from the 
Console Redirection 
window.

Ensure that the management station’s monitor resolution is 
set to 1280x1024.

The console window is 
garbled.

The console viewer on Linux requires a UTF-8 character set. 
Check your locale and reset the character set if needed. 
See "Setting the Locale in Linux" for more information.

Table 12-7.

Using Console Redirection: Frequently Asked Questions 

(continued)

Question

Answer

Содержание IDRAC6

























































































































































































































































































































































































































































































Отзывы:

Нет отзывов