manualshive.com logo in svg

Dell IDRAC6, Руководство пользователя, Страница: 218 / 472

Поделиться
Скачать
Dell IDRAC6 Скачать руководство пользователя страница 218

218

Using GUI Console Redirection

4

If you want to enable (turn on) local video on the server, in the 

Configuration 

screen, select 

Local Server Video Enabled 

and then click 

Apply

.

The 

Console Redirection

 screen displays the status of the Local Server Video.

Frequently Asked Questions

Table 12-7 lists frequently asked questions and answers.

Table 12-7.

Using Console Redirection: Frequently Asked Questions

Question

Answer

vKVM fails to log out 
when the out–of–band 
Web GUI is logged 
out.

The vKVM and vMedia sessions stays active even if the web 
session is logged off. Close the vMedia and vKVM viewer 
applications to log out of the corresponding session.

Can a new remote 
console video session 
be started when the 
local video on the 
server is turned off?

Yes.

Why does it take 
15 seconds to turn off 
the local video on the 
server after requesting 
to turn off the local 
video?

It gives a local user an opportunity to take any action before 
the video is switched off.

Is there a time delay 
when turning on the 
local video?

No, once a local video turn 

ON

 request is received by 

iDRAC6 the video is turned on instantly.

Can the local user also 
turn off the video?

Yes, a local user can use the local RACADM CLI to turn off 
the video.

Can the local user also 
turn on the video?

No. Once the local console is disabled, the local user’s 
keyboard and mouse are disabled and they are unable to 
change any settings. 

Содержание IDRAC6

























































































































































































































































































































































































































































































Отзывы:

Нет отзывов