Dell IDRAC6 Скачать руководство пользователя страница 159 | Manualshive

Страница: 159 / 472

Dell IDRAC6 Скачать руководство пользователя страница 159

Using iDRAC6 With Microsoft Active Directory

159

If you are using standard schema, and users and role groups are from different
domains, you must configure global catalog address(es). In this case, you can
use only Universal Group.

If you are using standard schema, and all the users and all the role groups are
in the same domain, you are not required to configure global catalog
address(es).

How does standard schema query work?

iDRAC6 connects to the configured domain controller address(es) first. If the
user and role groups reside in that domain, the privileges are saved.

If global controller address(es) is configured, iDRAC6 continues to query the
Global Catalog. If additional privileges are retrieved from the Global Catalog,
these privileges are accumulated.

Miscellaneous

Does iDRAC6 always use LDAP over SSL?

Yes. All the transportation is over secure port 636 and/or 3269.

During

test settings

, iDRAC6 does a LDAP CONNECT only to help isolate

the problem, but it does not do an LDAP BIND on an insecure connection.

Does iDRAC6 support the NetBIOS name?

Not in this release.

«
...
157
158
159
160
161
...
»

Содержание IDRAC6

























































































































































































































































































































































































































































































Отзывы:

Нет отзывов