Driver specification
Hard drives
ThePowerEdge M630p system supports:
•
Up to two 2.5-inch, hot-swappable SAS, SATA hard drives or SAS or SATA or PCIe SSDs
SSDs
The PowerEdge M630p system supports:
•
Up to four 1.8-inch, hot-swappable SATA SSDs
Optical drive
The PowerEdge M630p system supports external optional USB DVD and one optional SATA DVD-ROM drive or DVD+/-RW drive.
Flash drive
The PowerEdge M630p system supports internal optional USB, internal optional SD card and optional vFlash card (with integrated
iDRAC8 Enterprise).
Ports and connectors specifications
USB ports
The PowerEdge M630p system supports:
•
One USB 2.0-compliant and one USB 3.0-compliant port on the front panel
•
Internal USB 2.0-compliant port
The following table provides more information about the USB specifications:
Table 10. USB specifications
System
Front panel
Internal
PowerEdge M630p
One 4-pin, USB 2.0-compliant and one 4-
pin, USB 3.0-compliant
•
Two internal SD cards dedicated for the
hypervisor
•
One SD card dedicated for future
vFlash support
Internal Dual SD Module
The PowerEdge M630p system supports two SD card slots and a USB interface dedicated for the embedded hypervisor. This card offers
the following features:
•
Dual card operation — maintains a mirrored configuration by using SD cards in both slots and provides redundancy.
•
Single card operation — single card operation is supported, but without redundancy.
Video specifications
The PowerEdge M630p system supports Matrox G200 VGA controller integrated with iDRAC and 2 GB shared with iDRAC application
memory.
Technical specifications
17
