●
PowerEdge R750XS
●
PowerEdge T550
●
PowerEdge XR11
●
PowerEdge XR12
●
PowerEdge T150
●
PowerEdge R350
●
PowerEdge R250
●
PowerEdge T350
PowerEdge systems supported by Dell HBA350i MX
The following PowerEdge system support the controller:
●
PowerEdge MX750c
PowerEdge systems supported by Dell HBA350i
Adapter
The following PowerEdge systems support the controller:
●
PowerEdge R640
●
PowerEdge R740
●
PowerEdge R740XD
●
PowerEdge T640
●
PowerEdge R440
●
PowerEdge R540
●
PowerEdge T440
Operating systems supported by Dell HBA355i
Adapter, Dell HBA355i Front, Dell HBA355e Adapter,
Dell HBA350i MX, and Dell HBA350i Adapter
See
Dell Technologies Enterprise operating systems support
for a list of supported operating systems by a specific server for
the Dell HBA355i Adapter cards.
NOTE:
For the latest list of supported operating systems and driver installation instructions, see the operating system
www.dell.com/operatingsystemmanuals
. For specific operating system service pack requirements, see the
Drivers and Downloads section at
.
MD1400 and MD1420 enclosure support for Dell
HBA355e Adapter
Dell HBA355e Adapter supports external enclosures MD1420 and MD1400.
The MD enclosure topology rules for Dell HBA355e Adapter are:
●
The maximum number of enclosures supported for single-path configuration is eight, and dual-path configuration is four.
●
A maximum of two enclosures are supported per port when using a daisy chain topology.
●
MD1400 and MD1420 can be connected to the same controller at the same time.
●
Mixing of MD and ME enclosures or mixing tape drives and MD or ME enclosures on the same controller is not supported.
●
Loopback connections of enclosures are not supported.
●
Mixing of single-path and dual-path configurations on the same controller is not supported.
●
Interleaving of port for multipath configuration is not supported.
Dell HBA355i Adapter, Dell HBA355i Front, Dell HBA355e Adapter, Dell HBA350i MX, and Dell HBA350i Adapter
11
