Dell G7 7700, Руководство по обслуживанию

Страница: 39 / 96

Steps
1. Using the alignment posts and rubber grommets, place the speakers on the slots on the palm-rest and keyboard assembly.
2. Route the speaker cable through the routing guides on the palm-rest and keyboard assembly.
3. Connect the speaker cable to the system board.
Next steps
1. Install the base cover .
2. Follow the procedure in After working inside your computer .
Rear cover
Removing the rear cover
Prerequisites
1. Follow the procedure in Before working inside your computer .
2. Remove the base cover .
About this task
The following image indicates the location of the rear cover and provides a visual representation of the removal procedure.
Removing and installing components 39