Dell G7 7700, Руководство по обслуживанию

Страница: 17 / 96

Steps
1. Align the screw holes on the battery with the screw holes on the palm-rest and keyboard assembly.
2. Replace the four screws (M2x4) that secure the battery to the palm-rest and keyboard assembly.
3. Connect the hard-drive cable to the system board and close the latch to secure the connection.
NOTE: This step applies only to computers shipped with a hard drive.
4. Connect the battery cable to the system board.
Next steps
1. Install the base cover .
2. Follow the procedure in After working inside your computer .
Removing the 6-cell battery
Prerequisites
1. Follow the procedure in Before working inside your computer .
2. Remove the base cover .
About this task
The following image indicates the location of the battery and provides a visual representation of the removal procedure.
Removing and installing components 17