background image

NOTE:

 It is recommended to shutdown the computer if it is on.

The one-time boot menu displays the devices that you can boot from including the diagnostic option. The boot menu options are:

Removable Drive (if available)

STXXXX Drive (if available)

NOTE:

 XXX denotes the SATA drive number.

Optical Drive (if available)

SATA Hard Drive (if available)

Diagnostics

The boot sequence screen also displays the option to access the System Setup screen.

System setup options

NOTE:

 Depending on this computer and its installed devices, the items listed in this section may or may not appear.

Table 4. System setup options—System information menu 

General-System Information

System Information

BIOS Version

Displays the BIOS version number.

Service Tag

Displays the Service Tag of the computer.

Asset Tag

Displays the Asset Tag of the computer.

Ownership Tag

Displays the ownership tag of the computer.

Manufacture Date

Displays the manufacture date of the computer.

Ownership Date

Displays the ownership date of the computer.

Express Service Code

Displays the express service code of the computer.

Memory Information

Memory Installed

Displays the total computer memory installed.

Memory Available

Displays the total computer memory available.

Memory Speed

Displays the memory speed.

Memory Channel Mode

Displays single or dual channel mode.

Memory Technology

Displays the technology used for the memory.

DIMM 1 Size

Displays the DIMM 1 memory size.

DIMM 2 Size

Displays the DIMM 2 memory size.

DIMM 3 Size

Displays the DIMM 3 memory size.

DIMM 4 Size

Displays the DIMM 4 memory size.

PCI Information

SLOT1

Displays the PCI information of the computer.

SLOT2

Displays the PCI information of the computer.

SLOT4

Displays the PCI information of the computer.

SLOT5_M.2

Displays the PCI information of the computer.

SLOT6_M.2

Displays the PCI information of the computer.

Processor Information

Processor Type

Displays the processor type.

Core Count

Displays the number of cores on the processor.

System setup

53

Содержание G5 5000

































































Отзывы: