Dell Force10 TeraScale C Series, Справочное руководство

Страница: 850 / 1640

850 | Intermediate System to Intermediate System (IS-IS)
www.dell.com | support.dell.com
Usage
Information
BGP to IS-IS redistribution supports “match” options using route maps. The metric value, level, and
metric-type of redistributed routes can be set by the redistribution command. More advanced “set”
options can be performed using route maps.
redistribute ospf
e
Redistribute routing information from an OSPF process.
Syntax redistribute ospf process-id
[
level-1
|
level-1-2
|
level-2
] [
match
{
internal
|
external
}]
[
metric metric-value
] [
metric-type
{
external
|
internal
}] [
route-map map-name
]
To return to the default values, enter the
no redistribute ospf process-id
[
level-1
|
level-1-2
|
level-2
] [
match
{
internal
|
external
}] [
metric metric-value
][
metric-type
{
external
|
internal
}] [
route-map map-name
] command.
Parameters
Defaults As above
Command Modes ROUTER ISIS ( for IPv4 )
CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 ( for IPv6 )
process-id
Enter a number that corresponds to the OSPF process ID to be redistributed.
Range: 1 to 65355
metric metric-value
(OPTIONAL) The value used for the redistributed route. You should use a
metric value that is consistent with the destination protocol.
Range: 0 to 16777215
Default: 0.
metric-type
{
external
|
internal
}
(OPTIONAL) The external link type associated with the default route
advertised into a routing domain. The two options are:
• external
• internal
level-1 (OPTIONAL) Routes are independently redistributed into IS-IS as Level 1
routes.
level-1-2 (OPTIONAL) Routes are independently redistributed into IS-IS as Level-1-2
routes.
level-2 (OPTIONAL) Routes are independently redistributed into IS-IS as Level 2
routes.
This is the default.
match
{
external
|
internal
}
(OPTIONAL) The command used for OSPF to route and redistribute into
other routing domains. The values are
• internal
• external
route-map map-name map-name
is an identifier for a configured route map.
The route map should filter imported routes from the source routing protocol
to the current routing protocol.
If you do not specify a
map-name,
all routes are redistributed. If you
specify a keyword, but fail to list route map tags, no routes will be imported.