Dell Force10 TeraScale C Series, Справочное руководство

Страница: 841 / 1640

Intermediate System to Intermediate System (IS-IS) | 841
isis priority
e
Set priority of the designated router you select.
Syntax isis priority value
[
level-1
|
level-2
]
To return to the default values, enter the
no isis priority
[
value
] [
level-1
|
level-2
] command.
Parameters
Defaults value
= 64;
level-1
(if not otherwise specified)
Command Modes
INTERFACE
Usage
Information
You can configure priorities independently for Level 1 and Level 2. Priorities determine which router
on a LAN will be the designated router. Priorities are advertised within hellos. The router with the
highest priority will become the designated intermediate system (DIS).
Routers with a priority of 0 cannot be a designated router. Setting the priority to 0 lowers the chance of
this system becoming the DIS, but does not prevent it. If all the routers have priority 0, one with
highest MAC address will become DIS even though its priority is 0.
is-type
e
Configure IS-IS operating level for a router.
Syntax is-type
{
level-1
|
level-1-2
|
level-2-only
}
To return to the default values, enter
no is-type
.
Parameters
Defaults level-1-2
Command Modes ROUTER ISIS
Usage
Information
The IS-IS protocol automatically determines area boundaries and are able to keep Level 1 and Level 2
routing separate. Poorly planned use of this feature may cause configuration errors, such as accidental
area partitioning.
If you are configuring only one area in your network, you do not need to run both Level 1 and Level 2
routing algorithms. The IS type can be configured as Level 1.
value
This value sets the router priority. The higher the value, the higher the priority.
Range: 0 to 127
Default: 64
level-1 (OPTIONAL) Specify the priority for Level 1.
This is the default.
level-2 (OPTIONAL) Specify the priority for Level 2.
level-1
Allows a router to act as a Level 1 router.
level-1-2
Allows a router to act as both a Level 1 and Level 2 router.
This is the default.
level-2-only
Allows a router to act as a Level 2 router.