manualshive.com logo in svg

Dell Force10 TeraScale C Series, Справочное руководство

Поделиться
Скачать
Dell Force10 TeraScale C Series Скачать руководство пользователя страница 551

Internet Group Management Protocol (IGMP) |

551

ip igmp ssm-map

c e s

Use a statically configured list to translate (*,G) memberships to (S,G) memberships.

Syntax

ip igmp ssm-map

 

std-access-list

 

source-address

Undo this configuration, that is, remove SSM map (S,G) states and replace them with (*,G) states 
using the command 

ip igmp ssm-map

 

std-access-list

 

source-address

 command.

Parameters

Command Modes

CONFIGURATION

Command

History

Usage

Information

Mapping applies to both v1 and v2 IGMP joins; any updates to the ACL are reflected in the IGMP 
groups. You may not use extended access lists with this command. When a static SSM map is 
configured and the router cannot find any matching access lists, the router continues to accept (*,G) 
groups.

Related

Commands

ip igmp static-group 

c e s

Configure an IGMP static group.

Syntax

ip igmp static-group 

{

group address

 [

exclude 

[

source address

]] | [

include 

{

source 

address

}]}

To delete a static address, use the 

no ip igmp static-group 

{

group address

 [

exclude 

[

source 

address

]] | [

include 

{

source address

}]} command.

Parameters

Defaults

No default values or behavior

Command Modes

INTERFACE

Command

History

std-access-list

Specify the standard IP access list that contains the mapping rules for multicast 
groups.

source-address

Specify the multicast source address to which the groups are mapped.

Version 7.8.1.0

Introduced on C-Series and S-Series

Version 7.7.1.0

Introduced on E-Series

ip access-list standard

Create a standard access list to filter based on IP address.

group address

Enter the group address in dotted decimal format (A.B.C.D)

exclude source 
address

(OPTIONAL) Enter the keyword 

exclude 

followed by the source address, in dotted 

decimal format (A.B.C.D), for which a static entry needs to be added.

include source 
address

(OPTIONAL) Enter the keyword 

include 

followed by the source address, in dotted 

decimal format (A.B.C.D), for which a static entry needs to be added.

Note: 

A group in 

include

 mode must have at least one source address 

defined.

Version 7.8.1.0

Introduced on S-Series

Version 7.7.1.0

Introduced on C-Series

Содержание Force10 TeraScale C Series









































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды