Dell Force10 TeraScale C Series, Справочное руководство

Страница: 362 / 1640

362 | Border Gateway Protocol IPv4 (BGPv4)
www.dell.com | support.dell.com
Usage
Information
FTOS software resolves the network address configured by the network command with the routes in
the main routing table to ensure that the networks are reachable via non-BGP routes and non-default
routes.
Related
Commands
Command
History
network backdoor
c e s
Specify this IGP route as the preferred route.
Syntax network ip-address mask backdoor
To remove a network, use the
no network ip-address mask backdoor
command.
Parameters
Defaults Not configured.
Command Modes ROUTER BGP
Usage
Information
Though FTOS does not generate a route due to backdoor config, there is an option for injecting/
sourcing a local route in presence of network backdoor config on a learned route.
Command
History
redistribute
c e s
Redistribute routes into BGP.
Syntax redistribute
{
connected
|
static
} [
route-map map-name
]
To disable redistribution, use the
no redistribution
{
connected
|
static
} command.
Parameters
redistribute Redistribute routes into BGP.
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series
ip-address
Enter an IP address in dotted decimal format of the network.
mask
Enter the mask of the IP address in the slash prefix length format (for example, /24).
The mask appears in command outputs in dotted decimal format (A.B.C.D).
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series
connected
Enter the keyword
connected
to redistribute routes from physically connected
interfaces.