Dell Force10 TeraScale C Series, Справочное руководство

Страница: 282 / 1640

282 | Access Control Lists (ACL)
www.dell.com | support.dell.com
Usage
Information
The
set local-preference
command changes the LOCAL_PREF attribute for routes meeting the
route map criteria. To change the LOCAL_PREF for all routes, use the
bgp default
local-preference
command.
Related
Commands
set metric
c e s
Configure a filter to assign a new metric to redistributed routes.
Syntax set metric [ + | - ] metric-value
To delete a setting, enter no set metric .
Parameters
Defaults
Not configured
Command Modes
ROUTE-MAP
Command
History
Related
Commands
set metric-type
c e s
Configure a filter to assign a new route type for routes redistributed to OSPF.
Syntax set metric-type
{
internal
|
external
|
type-1
|
type-2
}
Parameters
Defaults Not configured.
bgp default local-preference Change default LOCAL_PREF attribute for all routes.
+ (OPTIONAL) Enter + to add a metric-value to the redistributed routes.
- (OPTIONAL) Enter - to subtract a metric-value from the redistributed routes.
metric-value Enter a number as the new metric value.
Range: zero (0) to 4294967295
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
pre-Version 6.1.1.0 Introduced for E-Series
set automatic-tag Compute the tag value of the route.
set level Specify the OSPF area for route redistribution.
set metric-type Specify the route type assigned to redistributed routes.
set tag Specify the tag assigned to redistributed routes.
internal
Enter the keyword
internal
to assign the Interior Gateway Protocol metric of the next
hop as the route’s BGP MULTI_EXIT_DES (MED) value.
external
Enter the keyword
external
to assign the IS-IS external metric.
type-1
Enter the keyword
type-1
to assign the OSPF Type 1 metric.
type-2
Enter the keyword
type-2
to assign the OSPF Type 2 metric.