Dell Force10 TeraScale C Series, Справочное руководство

Страница: 1560 / 1640

1560 | E-Series Debugging and Diagnostics
www.dell.com | support.dell.com
Example Figure 65-16. clear hardware linecard Command Example
Related
Commands
clear hardware rpm mac counters
e
Clear the MAC counters for the party-bus control switch on the IPC subsystem of the RPM.
Syntax clear hardware rpm slot-number mac counters
Parameters
Defaults
No default behavior or values
Command Mode
EXEC
EXEC Privilege
Command
History
hardware monitor linecard
e
Configure the system to take an action upon a line card hardware error.
Syntax hardware monitor linecard asic
{
btm
[
action-on-error
{
card-problem
|
card-reset
|
card-shutdown
}] |
fpc
[
action-on-error | parity-correction
]}
Parameters
FTOS#clear hardware linecard 2 port-set 0 btm ingress errors
FTOS#clear hardware rpm 1 port-set 0 btm ingress errors
FTOS#clear hardware rpm 0 port-set 0 btm ingress errors
% Error: RPM 0 is not active.
FTOS#
show hardware btm Display the BTM counters
slot-number Enter the RPM slot number.
Range: 0 -1
Version 6.5.4.0 Introduced
action-on-error
Enter the keyword
action-on-error
to further specify actions that should be
taken in the event of a hardware error.
btm
Enter the keyword
btm
to configure the system to take an action upon a Buffer
Traffic Manager hardware error.
fpc
Enter the keyword
fpc
to configure the system to take an action upon a Flexible
Packet Classifier hardware error.
card-problem
Enter the keyword
card-problem
to place a line card in a card-problem state
upon a hardware error.
card-reset
Enter the keyword
card-reset
to reset a line card upon a hardware error.
card-shutdown
Enter the keyword
card-shutdown
to shutdown a line card upon a hardware
error.
parity-correction
Enter the keyword
parity-correction
to enable automatic parity corrections for
SRAM. The line card must be reloaded before the feature becomes operational.