manualshive.com logo in svg

Dell Force10 TeraScale C Series, Справочное руководство

Поделиться
Скачать
Dell Force10 TeraScale C Series Скачать руководство пользователя страница 1362

1362

|

SNMP and Syslog

www.dell.com | support.dell.com

Usage

Information

FTOS supports up to 16 SNMP trap receivers.

If this command is not configured, no traps controlled by this command are sent. If you do not specify 
a 

notification-type

 and 

notification-option

, all traps are enabled.

Related

Commands

 

snmp-server engineID 

c e s

Configure name for both the local and remote SNMP engines on the router.

Syntax

snmp-server engineID 

[

local

 

engineID

] [

remote

 

ip-address

 

udp-port

 

port-number 

engineID

] 

To return to the default, use the 

no

 

snmp-server engineID 

[

local

 

engineID

] [

remote

 

ip-address

 

udp-port

 

port-number engineID

] command

Parameters

 

Defaults

As above

Command Modes

CONFIGURATION

Command

History

Usage

Information

Changing the value of the SNMP Engine ID has important side effects. A user's password (entered on 
the command line) is converted to an MD5 (Message Digest Algorithm) or SHA (Secure Hash 
Algorithm) security digest. This digest is based on both the password and the local Engine ID. The 
command line password is then destroyed, as required by RFC 2274. Because of this deletion, if the 
local value of the Engine ID changes, the security digests of SNMPv3 users will be invalid, and the 
users will have to be reconfigured.

For the remote Engine ID, the host IP and UDP port are the indexes to the command that are matched 
to either overwrite or remove the configuration.

Version 7.5.1.0

Support added for C-Series

E-Series legacy command

snmp-server community

Enable SNMP and set the community string.

local

 

engineID

Enter the keyword 

local

 followed by the engine ID number that identifies 

the copy of the SNMP on the 

local

 device. 

Format (as specified in RFC 3411): 12 octets. 

•

The first 4 octets are set to the private enterprise number. 

•

The remaining 8 octets are the MAC address of the chassis.

remote

 

ip-address

Enter the keyword 

remote

 followed by the IP address that identifies the 

copy of the SNMP on the 

remote

 device. 

udp-port

 

port-number 

engineID

Enter the keyword 

udp-port

 followed by the UDP (User Datagram 

Protocol) port number on the remote device. 

Range: 0 to 65535

Default: 162

Version 7.6.1.0

Support added for S-Series

Version 7.5.1.0

Support added for C-Series

E-Series legacy command

Содержание Force10 TeraScale C Series









































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды