Dell External OEMR 2850, Руководство пользователя

Страница: 69 / 176

Preparing the Script Files for Deployment Using Microsoft Windows PE
69
passed, the default variables values used in this script are set in the
TKENVSET.BAT scripts. An optional second parameter can be passed to
this file, which specifies the IP address to be used to configure the RAC.
The
raccfg.ini file is generated with the RACCAP.BAT sample script.
See "RACCAP.BAT" for information about using the RACCAP.BAT sample
script to capture RAC configuration information.
RAIDCFG.BAT
The RAIDCFG.BAT sample script configures RAID controllers detected on
the system. User input is optional to run this script. The parameter is a name
or path to a log file. This parameter is not set to any value by default, and no
log file is generated. The default variable values used in this script are set in
the
TKENVSET.BAT scripts. This script uses the RAIDCFG.EXE utility to
automatically configure the detected controllers on your target system. For
example, for the first controller discovered, if
RAIDCFG.EXE discovers only
one attached hard drive, the script tries to create RAID 0; if two hard drives
are discovered, a RAID 1 configuration is enabled; if three or more hard drives
are discovered, a RAID 5 configuration is enabled.
NOTE:
On the detected controller, a RAID virtual disk is created only if the array
disks connected to that particular controller have space available and, where
applicable, are not part of already existing array group.
SYSREP.BAT
The SYSREP.BAT sample script applies SYSCFG options to the target
system based on configuration information that has been saved in a
configuration file. User input is optional to run this script, depending on the
variable settings in the
SYSREP.BAT scripts . This script uses the
SYSCFG.EXE utility to configure the BIOS and BMC in the target system
using the configuration file, syscfg.ini , passed as the first parameter to this
script. If this parameter is not passed, the default variables values used in this
script are set in the
SYSREP.BAT scripts. The syscfg.ini file is generated with
the SYSCAP.BAT sample script. See "SYSCAP.BAT" for information about
using the SYSCAP.BAT sample script to capture BIOS and BMC settings.
The second parameter is a name or path to a log file. This parameter is not set
to any value by default, and no log file is generated.
NOTE:
If the replication requires a change in the memory redundancy mode,
the target server should be rebooted and the script should be executed again
to complete the replication.