Dell EqualLogic FS7600, Инструкция по установке и настройке

Страница: 38 / 46

For complete information about accessing CIFS shares, and setting ACLs or SLPs on a CIFS share, see the Dell
EqualLogic Group Manager Administrator's Manual and the online help available from the Group Manager GUI
interface.
Accessing an NFS Export
If you plan to use NFS over TCP, set up the firewall first:
1. Adjust the firewall to allow the FS7600 controllers to be the source IP.
2. Open the firewall to allow for port ranges.
To mount an NFS export on a UNIX system, log in as
root
and run the
mount
command with the following
recommended options and parameters:
mount -o rw,bg,hard,nointr,tcp,vers=3,timeo=2,retrans=10,rsize=32768,
wsize=32768 client_access_vip:hostname:/container_name /exported_directory /local_directory
The
exported_directory
must be the full path name that you specified when creating the NFS export.
Because the default trusted user setting is “All except root,” only users other than
root
can access the export.
You can modify the export and change the trusted users to “Nobody” or “All.”
In addition:
• The default client access permission provides access to all clients. You can modify the export and limit
access to specific IP addresses.
• The default access type is read-write. You can modify the export and change it to read-only.
For complete information about accessing an NFS export, see the
Dell EqualLogic Group Manager
Administrator's Manual and the online help available from the Group Manager GUI interface.
32
Dell EqualLogic FS7600 Installation and Setup Guide 6 NAS Storage Allocation