Dell EMC XC Core XC7525, Инструкция по установке и обслуживанию

Страница: 10 / 144

Left control panel view
Figure 3. Left control panel without optional iDRAC Quick Sync 2 indicator
Figure 4. Left control panel with optional iDRAC Quick Sync 2 indicator
Table 2. Left control panel
Item Indicator, button, or
connector
Icon Description
1 Status LED indicators N/A Indicates the status of the system. For more information, see
the
Status LED indicators section.
2
System health and system
ID indicator Indicates the system health. For more information, see the
System health and system ID indicator codes section.
3
iDRAC Quick Sync
2 wireless indicator
(optional)
Indicates if the iDRAC Quick Sync 2 wireless option is activated.
The Quick Sync 2 feature allows management of the system
using mobile devices. This feature aggregates hardware/
firmware inventory and various system level diagnostic/error
information that can be used in troubleshooting the system.
You can access system inventory, Dell Lifecycle Controller
logs or system logs, system health status, and also configure
iDRAC, BIOS, and networking parameters. You can also launch
the virtual Keyboard, Video, and Mouse (KVM) viewer and
virtual Kernel-based Virtual Machine (KVM), on a supported
mobile device. For more information, see the Integrated Dell
Remote Access Controller User's Guide at
www.dell.com/
poweredgemanuals
NOTE: For more information about the indicator codes, see the System diagnositcs and indicator codes section.
Table 3. Decoding of system ID button and Wireless button
Status ID Button Wireless Button
Healthy Solid Blue Off
Fault Blinking Amber Off
System ID Blinking Blue Off
10 System overview