Dell EMC VxFlex Ready Node R840, Руководство пользователя

Страница: 207 / 218

Table 39 iDRAC Quick Sync 2 indicators and descriptions (continued)
iDRAC Quick Sync 2
indicator code Condition Corrective action
Solid amber Indicates that the system is in
fail-safe mode. Restart the system.If the problem
persists, see "Getting help."
Blinking amber Indicates that the iDRAC
Quick Sync 2 hardware is not
responding properly. Restart the system. If the problem
persists, see "Getting help."
iDRAC Direct LED indicator codes
The iDRAC Direct LED indicator lights up to indicate that the port is connected and is
being used as a part of the iDRAC subsystem.
You can configure iDRAC Direct by using a USB to micro USB (type AB) cable, which
you can connect to your laptop or tablet. The following table describes iDRAC Direct
activity when the iDRAC Direct port is active:
Note
The internal USB is not supported on VxFlex Ready Node R840.
The iDRAC Direct LED indicator codes table describes the iDRAC status when it is
solid green, flashing green, and when it is turned off.
Table 40 iDRAC Direct LED indicator codes
iDRAC Direct
LED indicator
code Condition
Solid green for
two seconds Indicates that the laptop or tablet is connected.
Flashing green (on
for two seconds
and off for two
seconds) Indicates that the laptop or tablet connected is recognized.
Turns off Indicates that the laptop or tablet is unplugged.
System diagnostics and indicator codes
iDRAC Direct LED indicator codes 207