Dell EMC VxFlex Ready Node R740xd, Руководство пользователя

Страница: 35 / 46

Table 29 System health and system ID indicator codes
System health and system ID indicator code Condition
Solid blue Indicates that the system is turned on, the system is healthy, and
system ID mode is not active. Press the system health and system
ID button to switch to system ID mode.
Blinking blue Indicates that the system ID mode is active. Press the system
health and system ID button to switch to system health mode.
Solid amber Indicates that the system is in fail-safe mode. If the problem
persists, see
Getting help on page 45 .
Blinking amber Indicates that the system is experiencing a fault. Check the
System Event Log or the LCD panel, if available on the bezel, for
specific error messages.
iDRAC Quick Sync 2 indicator codes
The iDRAC Quick Sync 2 module (optional) is located on the left control panel of your system.
Figure 17 iDRAC Quick Sync 2 indicators
Table 30 iDRAC Quick Sync 2 indicators and descriptions
iDRAC Quick Sync 2 indicator
code Condition Corrective action
Off (default state) Indicates that the iDRAC Quick Sync 2
feature is turned off. Press the iDRAC
Quick Sync 2 button to turn on the iDRAC
Quick Sync 2 feature. If the LED fails to turn on, reseat the left control
panel flex cable and check. If the problem persists,
see "Getting help."
Solid white Indicates that iDRAC Quick Sync 2 is
ready to communicate. Press the iDRAC
Quick Sync 2 button to turn off. If the LED fails to turn off, restart the system. If
the problem persists, see
Getting help on page 45 .
Blinks white rapidly Indicates data transfer activity. If the indicator continues to blink indefinitely, see
Getting help on page 45 .
Blinks white slowly Indicates that firmware update is in
progress. If the indicator continues to blink indefinitely, see
Getting help on page 45 .
Blinks white five times rapidly and
then turns off Indicates that the iDRAC Quick Sync 2
feature is disabled. Check if iDRAC Quick Sync 2 feature is configured
to be disabled by iDRAC. If the problem persists,
see
Getting help on page 45 . For more
information, see Integrated Dell Remote Access
Controller User's Guide
at www.dell.com/
idracmanuals or
Dell OpenManage Server
Administrator User’s Guide
at www.dell.com/
openmanagemanuals .
System diagnostics and indicator codes
R740xd Owner's Guide 35