Dell EMC VxFlex Ready Node 14G Скачать руководство пользователя страница 69

Страница: 69 / 86

Procedure

1. Align the screws with the designated U spaces on the front and rear rack

flanges.

Ensure that the screw holes on the tab of the system retention bracket are
seated on the designated U spaces.

2. Insert and tighten the two screws using the Phillips #2 screwdriver.

Figure 28 Installing screws

Install the system in the cabinet

This procedure is used to install the system in the cabinet.

WARNING

The system is heavy and should be installed in a cabinet by two people. To avoid
personal injury and/or damage to the equipment, do not attempt to install the
system in a cabinet without a mechanical lift and/or help from another person.

Procedure

1. At front of the cabinet, pull the inner slide rails out of the cabinet until they lock

into place.

2U1N Configuration Equipment Installation

Install the system in the cabinet

Содержание EMC VxFlex Ready Node 14G























































































Результаты поиска

Содержание EMC VxFlex Ready Node 14G

Отзывы:

Похожие инструкции для EMC VxFlex Ready Node 14G

Бренды по названию

Популярные бренды

Dell EMC VxFlex Ready Node 14G, Руководство по установке оборудования

Результаты поиска

Содержание EMC VxFlex Ready Node 14G

Отзывы:

Похожие инструкции для EMC VxFlex Ready Node 14G

Бренды по названию

Популярные бренды