Dell EMC VxFlex Ready Node 14G, Руководство по установке оборудования

Страница: 35 / 86

Figure 11 Installing screws
Install the system in the cabinet
This procedure is used to install the system in the cabinet.
WARNING
The system is heavy and should be installed in a cabinet by two people. To avoid
personal injury and/or damage to the equipment, do not attempt to install the
system in a cabinet without a mechanical lift and/or help from another person.
Procedure
1. At front of the cabinet, pull the inner slide rails out of the cabinet until they lock
into place.
Figure 12 Pull the inner rails out of the cabinet
2. Locate the rear rail standoff on each side of the system. Position the system
above the rails and lower the rear rail standoffs into the rear J-slots on the slide
assemblies.
1U1N Configuration Equipment Installation
Install the system in the cabinet 35