manualshive.com logo in svg

Dell EMC VxFlex Appliance R840, Руководство пользователя

Поделиться
Скачать
Dell EMC VxFlex Appliance R840 Скачать руководство пользователя страница 10

R840 system overview

The VxFlex Appliance and VxFlex Ready Node R840 server is a 2U server that supports a maximum of:

l

Four Intel Xeon Processor Scalable family (Skylake-EP) processors

l

48 DIMM slots

l

Two AC power supply units

l

24 SAS, SATA and up to 24 NVMe drives

l

The VxFlex Ready Node also supports a BOSSless configuration.

For more information about supported drives, see 

Technical specifications

.

Note:

 All instances SAS, SATA, or NVMe and are referred to as drives in this document, unless specified otherwise.

Front view of the R840 system

Use this topic to understand the front view of the R840 system.

The following image shows the front view of the R840 system:

1.

Left control panel

2.

Drives

3.

Right control panel

4.

Service Tag

Control panels

This section describes the system's control panels.

Left control panel

The left control panel is explained as follows:

The following image shows the left control panel view with optional iDRAC Quick Sync 2.0 indicator:

System overview

10

R840xd Owner's Guide

Содержание EMC VxFlex Appliance R840













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды