Dell EMC VEP1425, Руководство по установке операционной системы

Страница: 34 / 36

NOTE: To access the latest LTE modem drivers for your VEP system running ADVA, go
to https://source.sierrawireless.com/resources/airprime/software/usb-drivers-linux-qmi-software-s2,-d-,41n2,-d-,61/
#sthash.KM7k2ze1.PrDDHhcE.dpbs .
5. From the Network Manager , verify that the LTE connection is listed.
Figure 44. LTE connection listing within ADVA Network Manager
6. From the Network icon in the toolbar, select the Mobile Broadband listing.
Figure 45. ADVA Network Manager
7. Select the Configure Network Settings option to configure the broadband network settings for the LTE modem.
LTE modem detection on ESXi
To initiate the detection of an LTE modem on the Virtual Edge Platform (VEP) 1405 or 4600 series of systems running ESXi,
perform the following steps:
1. To enable the LTE card, select
Enable ESXi Shell from the Troubleshooting Mode Options menu.
2. Select Enable SSH and then press Enter to enable the service.
3. Log in to the ESXi shell and add the following entries in the
passthru.map
file at
/etc/vmware/passthru.map
:
168c 003c d3d0 false
4. Connect the LTE modem to the VEP system.
ESXi automatically detects the LTE modem.
5. To verify that the LTE modem is attached, enter the following command:
lsusb:
[root@localhost:~] lsusb
Bus 001 Device 004: ID 1199:9071 Sierra Wireless, Inc.
Bus 001 Device 003: ID 046b:ff20 American Megatrends, Inc.
Bus 001 Device 002: ID 046b:ff01 American Megatrends, Inc.
Bus 001 Device 001: ID 0e0f:8003 VMware, Inc. Root Hub
6. From the ESXi server, create a Microsoft Windows VM so that the LTE modem can be used.
34 LTE modem detection