Executing Power Control Operations on the IOM
You can remotely reset or turn on an IOM.
NOTE: To perform power management actions, you must have the Chassis Configuration Administrator privilege.
Executing Power Control Operations on IOM Using CMC Web Interface
To execute power control operations on the I/O Module:
1.
In the left pane, click
Chassis Overview
→
I/O Module Overview
→
Power
.
2.
On the
Power Control
page, for the IOM, from the drop-down menu, select the operation you want to execute (power cycle).
3.
Click
Apply
.
Executing Power Control Operations on the IOM Using RACADM
To execute power control operations on the IOM using RACADM, open a serial/Telnet/SSH text console to CMC, log in, and type:
racadm chassisaction -m switch <
action
>
where <
action
> indicates the operation you want to execute: power cycle.
166
