manualshive.com logo in svg

Dell EMC PowerEdge VRTX, Руководство пользователя

Поделиться
Скачать
Dell EMC PowerEdge VRTX Скачать руководство пользователя страница 144

Wide Name/Media Access Control (WWN/MAC) addresses to Fibre Channel and Ethernet devices. Chassis assigned WWN/MAC 
addresses are globally unique and specific to a server slot.

Viewing FlexAddress Activation Status

A Feature Card contains one or more of the following features: FlexAddress, FlexAddress Plus, and/or Extended Storage.
To view the chassis FlexAddress status using the CMC web interface, click 

Chassis Overview 

→ 

Setup

.

The 

General Chassis Settings

 page is displayed.

The 

FlexAddress

 has a value 

Active

 or 

Not Active

. The value 

Active

 indicates that the feature is installed on the chassis and 

Not 

Active

 indicates that the feature is not installed and not in use on the chassis.

Run the following RACADM command to view the SD feature card status:

racadm featurecard -s

The following message is displayed:

Active CMC:

The feature card inserted is valid, serial number CN0H871T1374036T00MXA00

The feature card contains the following feature(s)

       FlexAddress: bound

       FlexAddressPlus: bound

       ExtendedStorage: bound

Standby CMC:

The feature card contains the following feature(s)

       ExtendedStorage: bound

NOTE: The secondary CMC is optional and the output for the standby CMC is displayed only if the standby CMC is 
available in the chassis.

Table 34. Status Messages Returned by the featurecard -s Command

Status Message

Actions

No feature card inserted.

Check CMC to verify that the SD card was properly 
inserted. In a redundant CMC configuration, ensure that the 
CMC with the SD feature card installed is the active CMC 
and not the standby CMC.

The feature card inserted is valid and contains 
the following feature(s) FlexAddress: bound.

No action required.

The feature card inserted is valid and contains 
the following feature(s) FlexAddress: bound to 
another chassis, svctag=ABC1234, SD card SN = 
1122334455.

Remove the SD card; locate and install the SD card for the 
current chassis.

The feature card inserted is valid and contains 
the following feature(s) FlexAddress: not bound.

The feature card can be moved to another chassis or can 
be reactivated on the current chassis. To reactivate on the 
current chassis, enter

 racadm racreset

 until the CMC 

module with the feature card installed becomes active.

Use the following RACADM command to display all activated features on the chassis:

racadm feature -s

The command returns the following status message:

Feature Name = FlexAddress             

       Date/time Activated = 05 Oct 2013 - 11:50:49  

       Feature installed from SD-card serial number = CN0H871T1374036T00MXA00 

       Feature Name = FlexAddressPlus         

       Date/time Activated = 05 Oct 2013 - 11:50:49  

       Feature installed from SD-card serial number = CN0H871T1374036T00MXA00 

       Feature Name = ExtendedStorage

144

Содержание EMC PowerEdge VRTX

















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды