–c
allows modifying the public key comment and is optional.
The <
passphrase
> is optional. After the command completes, use the public file to pass to the RACADM for uploading the file.
RACADM Syntax Notes for CMC
When using the
racadm sshpkauth
command, ensure the following:
•
For the
–i
option, the parameter must be
svcacct
. All other parameters for
-i
fail in CMC. The
svcacct
is a special account
for public key authentication over SSH in CMC.
•
To log in to the CMC, the user must be service. Users of the other categories do have access to the public keys entered using
the
sshpkauth
command.
Viewing Public Keys
To view the public keys that you have added to the CMC, type:
racadm sshpkauth –i svcacct –k all –v
To view one key at a time, replace
all
with a number from 1 – 6. For example, to view key 2, type:
racadm sshpkauth –i svcacct –k 2 –v
Adding Public Keys
To add a public key to the CMC using the file upload
-f
option, at the commond line interface console, enter:
racadm sshpkauth –i svcacct –k 1 –p 0xfff –f <public key file>
NOTE: You can use only the file upload option with remote RACADM. For more information, see
Chassis Management
Controller for PowerEdge VRTX RACADM Command Line Reference Guide
.
To add a public key using the text upload option, enter:
racadm sshpkauth –i svcacct –k 1 –p 0xfff –t “<public key text>”
Deleting Public Keys
To delete a public key, run the following command:
racadm sshpkauth –i svcacct –k 1 –d
To delete all public keys, run the following command:
racadm sshpkauth –i svcacct –k all –d
Configuring Terminal Emulation Software
CMC supports a serial text console from a management station running one of the following types of terminal emulation software:
•
Linux Minicom.
•
Hilgraeve’s HyperTerminal Private Edition (version 6.3).
Complete the tasks in the following subsections to configure the required type of terminal software.
Configuring Linux Minicom
Minicom is a serial port access utility for Linux. The following steps are valid for configuring Minicom version 2.0. Other Minicom
versions may differ slightly, but require the same basic settings. To configure other versions of Minicom, see the information in the
section Required Minicom Settings of this User's Guide.
137
