Dell EMC PowerEdge R640 Скачать руководство пользователя страница 17

Страница: 17 / 164

Item

Ports, panels, or slots

Icon

Description

VGA port

Enables you to connect a display device to the system. For more

information, see the Technical specifications section.

Serial port

Enables you to connect a serial device to the system. For more

information, see the Technical specifications section.

iDRAC9 Enterprise port

Enables you to remotely access iDRAC. For more information, see the

iDRAC User’s Guide at

Dell.com/idracmanuals

CMA power port

N/A

The Cable Management Arm (CMA) power port enables you to connect
to the CMA.

System identification button

The System Identification (ID) button is available on the front and back of

the systems. Press the button to identify a system in a rack by turning on

the system ID button. You can also use the system ID button to reset

iDRAC and to access BIOS using the step through mode.

NIC indicator codes

Each NIC on the back panel has indicators that provide information about the activity and link status. The activity LED indicator indicates if
data is flowing through the NIC, and the link LED indicator indicates the speed of the connected network.

Figure 12. NIC indicator codes

link LED indicator

activity LED indicator

Table 9. NIC indicator codes

Status

Condition

Link and activity indicators are off

The NIC is not connected to the network.

Link indicator is green and activity indicator is blinking green The NIC is connected to a valid network at its maximum port speed and

data is being sent or received.

Link indicator is amber and activity indicator is blinking
green

The NIC is connected to a valid network at less than its maximum port
speed and data is being sent or received.

Link indicator is green and activity indicator is off

The NIC is connected to a valid network at its maximum port speed and
data is not being sent or received.

Link indicator is amber and activity indicator is off

The NIC is connected to a valid network at less than its maximum port
speed and data is not being sent or received.

Link indicator is blinking green and activity is off

NIC identify is enabled through the NIC configuration utility.

Dell EMC PowerEdge R640 Installation and Service Manual

PowerEdge R640 system overview

Содержание EMC PowerEdge R640





































































































































































Результаты поиска

Содержание EMC PowerEdge R640

Отзывы:

Похожие инструкции для EMC PowerEdge R640

Бренды по названию

Популярные бренды

Dell EMC PowerEdge R640, Инструкция по установке и обслуживанию

Результаты поиска

Содержание EMC PowerEdge R640

Отзывы:

Похожие инструкции для EMC PowerEdge R640

Бренды по названию

Популярные бренды