Dell EMC Core XC750, Инструкция по установке и обслуживанию

Страница: 9 / 186

Figure 2. Front view of the 12 x 3.5-inch drive system
Table 1. Features available on the front of the system
Item Ports, panels, and
slots
Icon Description
1 Left control panel N/A
Contains the system health, system ID, status LED, and the iDRAC Quick Sync 2
(wireless) indicator.
NOTE: The iDRAC Quick Sync 2 indicator is available only on certain
configurations.
●
Status LED: Enables you to identify any failed hardware components. There are
up to five status LEDs and an overall system health LED (Chassis health and
system ID) bar. For more information, see the Status LED indicators section.
● Quick Sync 2 (wireless): Indicates a Quick Sync enabled system. The Quick
Sync feature is optional. This feature allows management of the system by
using mobile devices called as OpenManage Mobile (OMM) feature. Using iDRAC
Quick Sync 2 with OpenManage Mobile (OMM) aggregates hardware or firmware
inventory and various system level diagnostic and error information that can be
used in troubleshooting the system. For more information, see the
Integrated
Dell Remote Access Controller User's Guide available at https://www.dell.com/
idracmanuals
2 Drive N/A Enables you to install drives that are supported on your system.
3 Right control panel N/A Contains the power button, USB port, iDRAC Direct micro port, and the iDRAC
Direct status LED.
4 Information tag N/A The Information tag is a slide-out label panel that contains system information such
as Service Tag, NIC, MAC address, and so on. If you have opted for the secure
default access to iDRAC, then the Information tag will also contain the iDRAC secure
default password.
Left control panel view
Figure 3. Left control panel without optional iDRAC Quick Sync 2 indicator
System overview 9