Dell ECS EX Series Скачать руководство пользователя страница 54 | Manualshive

Страница: 54 / 112

background image

Figure 41. EX300 server chassis rear view

Table 19. Server Panel, Ports, and Slots

Item

Panel, Ports, and Slots

Description

1

Full-height PCIe expansion card slot
(3)

The PCIe expansion card slot (riser 1) connects up to three full-height PCIe
expansion cards to the system. The Boot Optimized Storage Subsystem
(BOSS) controller card with one M.2 stick is in the top PCIe slot (slot 1).

2

Half-height PCIe expansion card slot The PCIe expansion card slot (riser 2) connects one half-height PCIe

expansion cards to the system.

3

Rear handle

The rear handle can be removed to enable any external cabling of PCIe
cards that are installed in the PCIe expansion card slot 6.

4

Drive slots

The two rear 3.5 inch rear drive slots contain fillers.

5

Power supply unit (2)

Two AC or DC power supply units (PSUs)

6

NIC ports

The NIC ports that are integrated on the network daughter card (NDC)
provide network connectivity. The two left 10 GbE data ports of each node
connect to one of the data ports on the back-end switches. The two right
10 GbE data ports of each node connect to one of the data ports on the
front-end switches.

7

USB port (2)

The USB ports are 9-pin and 3.0-compliant. These ports enable you to
connect USB devices to the system.

8

VGA port

Enables you to connect a display device to the system.

9

Serial port

Enables you to connect a serial device to the system.

10

iDRAC9 dedicated port

Enables you to remotely access iDRAC. For more information, see the

Integrated Dell Remote Access Controller 9 (iDRAC9) User’s Guide

11

System identification button

The System Identification (ID) button is available on the front and back of
the systems. Press the button to identify a system in a rack by turning
on the system ID button. You can also use the system ID button to reset
iDRAC and to access BIOS using the step through mode.

EX300 disk drives

Describes the disk drives that are integrated into the server chassis of the EX300 appliance.

EX300 nodes contain twelve 3.5 inch SATA front-accessible, hot-swappable drives in slots 0 to 11. Disk size can be 1 TB, 2 TB, 4
TB, 8 TB, or 16 TB. All drives within a node must be of the same drive size, but there can be nodes of differing drive sizes within
a rack. In PCIe slot 1 of each node there is a 480 GB Boot Optimized Storage Subsystem (BOSS) controller card with one M.2
stick.

54

EX300 Platform

«
...
52
53
54
55
56
...
»

Содержание ECS EX Series

















































































































Отзывы:

Нет отзывов

Похожие инструкции для ECS EX Series

eServer 200 xSeries

Бренд: IBM Страницы: 128

eServer 232 xSeries

Бренд: IBM Страницы: 174

AlphaServer ES45 1B

Бренд: Compaq Страницы: 322

StorageWorks E Series

Бренд: HP Страницы: 8

StorageWorks 9000s NAS

Бренд: HP Страницы: 7

StorageWorks NAS e7000 v2

Бренд: HP Страницы: 2

StorageWorks NAS e7000 v2

Бренд: HP Страницы: 70

StorageWorks 600 All-in-One

Бренд: HP Страницы: 58

StorageWorks All-in-One SB600c - Storage Blade

Бренд: HP Страницы: 60

Бренд: DataCard Страницы: 2

@server x Series

Бренд: IBM Страницы: 8

Бренд: dallmeier Страницы: 12

Бренд: Kontron Страницы: 42

Бренд: SCT Страницы: 33

Бренд: XtendLan Страницы: 27

Бренд: SAFARI Montage Страницы: 5

Бренд: San Telequip Страницы: 26

Бренд: Echostreams Страницы: 3

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды