Table 30. Intel Optane PMem 200 Series Configuration 1 - 4 x RDIMMs/ LRDIMMs, 4 x Intel Optane
PMem 200 Series
Total No of
RDIMMs/
LRDIMMs
Total No of
Intel Optane
PMem 200
Series DIMMs
1 R/LRDIMM
capacity (GB)
1 Intel Optane
PMem 200
Series capacity
(GB)
Total Standard
Memory Capacity
Total PM
Capacity
Supported
Modes
4
4
16
128
64
512
MM or AD
4
4
32
128
128
512
MM or AD
4
4
64
128
256
512
AD
4
4
128
128
512
512
AD
Table 31. Intel Optane PMem 200 Series Configuration 2 - 6 x RDIMMs/ LRDIMMs, 1 x Intel Optane PMem
200 Series
Total No of
RDIMMs/
LRDIMMs
Total No of
Intel Optane
PMem 200
Series
DIMMs
1 R/LRDIMM
capacity (GB)
1 Intel Optane
PMem 200
Series
capacity (GB)
Total Standard
Memory Capacity
Total PM
Capacity
Supported Modes
6
1
16
128
96
128
AD
6
1
32
128
192
128
AD
6
1
64
128
384
128
AD
6
1
128
128
768
128
AD
Removing a memory module
Prerequisites
1. Follow the safety guidelines listed in the
.
2. Follow the procedure listed in the
Before working inside your system
3.
Remove the expansion card riser 2
.
4.
.
NOTE:
The procedure to remove the memory module is the same for Rear Accessed and Front Accessed configurations.
WARNING:
The memory modules are hot to touch for some time after the system has been powered off. Allow
the memory modules to cool down before handling them.
CAUTION:
To ensure proper system cooling, memory module blanks must be installed in any memory socket that
is not occupied. Remove memory module blanks only if you intend to install memory modules in those sockets.
Steps
1. Locate the appropriate memory module socket.
2. To release the memory module from the socket, simultaneously press the ejectors on both ends of the memory module
socket to fully open.
CAUTION:
Handle each memory module only by the card's edges, ensuring not to touch the middle of the
memory module or the metallic contacts.
3. Lift the memory module away from the system.
Installing and removing system components
81
